|
|
Street Lighting Control
Kořenek, Jan ; Krbal, Michal (referee) ; Štěpánek, Jaroslav (advisor)
This bachelor thesis deals in a theoretical part with the origin of the light, his features and lighttechnical quantities. There are also characterized light sources, which are currently most used to control street lighting. There are further described basics of the street light and currently most used ways of street lighting control. Further part of this thesis is focused on practical control of different types of light sources and monitoring their parameters, such as luminous flux, power, efficiency or correlated colour temperature during voltage reduction. These light sources are high pressure sodium lamps, halogenid lamp, fluorescent lamp and high pressure mercury lamp. Main conclusion from measurements are several cross characteristics, where is possible to monitor behavior of the parameters during voltage reduction. The last part concerned about practical street lighting control in Bezděkov, which is a village located near Havlíčkův Brod. There was connected the dimmer. On the street was created net of points according to the standard. In these points were measured illuminance for voltage 230 V and then for lower voltages 210 V and 190 V. These values were processed and average and minimum value was compared with the value defined in the standard.
|
|
| |
|
| |
|
|
Map of lighting in GIS
Suchý, Petr ; Rozman, Jiří (referee) ; Čech, Petr (advisor)
This thesis deals with legislation and public lighting. Furthermore, this topic is closely related to describing the characteristics of lighting and hygiene levels in comparison with the IEC standards. The work focuses on theoretical training, follow-field measurement and analysis of data obtained. The paper discussed aspects related to the light, physiology of vision and optical comfort. Outdoor lighting and its technical characteristics. Brief description of standards and their use in planning practical measurement of public lighting. A substantial part of the work is focused on graphical analysis of values and their comparison with the standard.
|
|
|
Simulation of LED retrofits under operational conditions
Tomeš, Martin ; Pavelka, Tomáš (referee) ; Škoda, Jan (advisor)
This Master’s Thesis on Simulation of LED retrofits under operational conditions is divided into theoretical and practical part. Theoretical part in the introductory section deals with the concepts of lighting technology and presents some electric light sources, such as classic bulbs, halogen bulbs, linear and compact fluorescent lamps. It also describes the principle of electroluminescent light sources (LED), which discusses principles of yielding a white light, the main advantages of LED etc. The reader is familiar with the issue of compensation the linear fluorescent lamps tubular LED source and with the work environment programme ReluxPro that is used for design of the lighting system. Practical part of the thesis is divided into two chapters. In the first chapter, measured linear fluorescent lamps and LED modules for the light-technical parameters, luminous intensity, radiation spectrum and settling time of light sources are evaluated and compared. The second chapter is solved by using ReluxPro, which explores the impact on the lighting and the brightness of the room layout SA 5.10 while using various light sources. In conclusion, there is an economic aspect of linear fluorescent lamps and LED modules analyzed. Results from the program ReluxPro are continuously compared with real measured values.
|
|
| |
|
|
Measurement uncertainties in photometry
Motyčka, Martin ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This master's thesis is focused on problematic of measurent unceartainties in photometry. Theoretical part describes photometric measururing instruments, their uncearnities and limitations. In the second part of this thesis there is a mathematical description of calculating uncearnities in laboratory conditions. In practical part there are calculations of uncearnities for photometric instruments at light laboraty VUT Brno.
|
|
|
IoT air monitoring
Kousal, Martin ; Povalač, Aleš (referee) ; Frýza, Tomáš (advisor)
The purpose of this bachelor work is to make a device that can measure air quality parameters and send them wirelessly to the server, where that measured data are processed and then shown to the user. The aim is to create a device with the lowest possible power consumption for the possibility of battery operation.
|
|
|
Possibilities of simulation modeling of traffic accidents with reduced visibility
Rozsíval, Jan ; Motl, Jakub (referee) ; Bradáč, Albert (advisor)
The diploma thesis deals with the possibilities of simulation modeling with reduced visibility in the Virtual CRASH program, which as the only available programs allows work both with the help of mathematical models to simulate vehicle movement and change parameters to simulate reduced visibility, lighting, etc. The theoretical part contains a description of photometric quantities, deals with the human eye and its ability to see under reduced visibility, a description of the luxmeter meter and luminance analyzers. Here are four main reasons for reduced visibility and their description. It contains a sample of the most used programs used to deal with traffic accidents. The four types of headlights most commonly used in today's vehicles are listed and described. In the experimental part, two measurements were performed. The first measurement to obtain input values to obtain a black and white texture determining the shape of the light rays emanating from the vehicle headlights. The second experiment to obtain the contrasts of the white box, black box and pedestrian for subsequent comparison with the output of the Virtual CRASH program.
|
|
|
Characteristic of photovoltaic system
Pokorný, Marek ; Dolenský, Jan (referee) ; Vaněk, Jiří (advisor)
The aim of this work is informed first about photovoltaics universally, works to inform the photovoltaic panels and complete plants. The work also includes instructions on how to implement PVP in accordance with law. Another part is the rough draft of the photovoltaic power 30 kWp, which can be placed on the house, computation and calculation of investment and them profitable investments to time. Design is made in two separate forms of the Fronius Solar and Sunny Design, their outputs are compared. The practical part of this work cooperates with the company SOLARTEC Ltd. for experimental measurements of the photovoltaic system and develop a methodology for setting the properties of real solar systems in operation from the measured data then stored in a database. These data further evaluate and compare the similar operating conditions. This data will show as the course of production of electricity during the typical day in percentage terms, depending on the incident irradiance, cell temperature, angle of incident radiation, etc. We can compare what it looks like an ideal day in terms of production of photovoltaic power, with the other days. Further are in work mentioned histograms achievement panel behind classical day and behind all - time investigation.
|
guest ::
